H-LIN INTERNATIONAL (HK) LIMITED
H-LIN INTERNATIONAL (HK) LIMITED
Add to Cart
Fast Connector(SC-APC) field assembly fiber optical connector(Pre-embedded)
Detailed Description:
FAST Connectors are factory pre-polished, field installable connectors that completely eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fiber alignment, a factory pre-cleaved fiber stub and a proprietary index-matching gel combine to offer an immediate low loss termination to either single-mode or multimode optical fibers.
FAST Connectors are compatible with 2m, 3mm, and 2.0 * 3.0mm cordage. Each connector is color coded per industry-standard requirements to aide in identification during and after installation.
The cold-welded hot-melt type fast connector is the same as the fiber-optic weld, but its weld point is inside the end of the connector, which is equivalent to the hot-melt to save the tail cable of the tail fiber. Compared with the mechanical fast connector, the utility model fast connector can improve the service life of the relay contacts and reduce the maintenance cost. We cooperate with Keelung, the first manufacturer of fiber-optic splicing machine in China, and apply KL-300F to the design of fast hot-melt fiber-to-home FTTH splicing connector according to the characteristics of KL-300F, thus saving V-groove mechanical connector maintenance, construction costs, and durability, overturning the usually expensive splicing machine and not suitable for FTTH construction. Concept.
Features:
Fast and convenient, high quality and reliable.
The insertion loss is low and the return loss is good.
High tensile force and low cost.
Application:
Distribution frames
Maintenance or emergency restoration of fiber networks
FTTH Outlets
Patch panels
Fiber optic fast connector has been widely used in fiber transmission lines, fiber optic wiring frames and fiber optic testing instruments, instrumentation, is the most used number of optical passive devices.
Specification:
| Item | Parameter |
| Cable Scope | 3.0 x 2.0 mm Bow-type Drop Cable |
| Fiber Diameter | 125μm ( 652 & 657 ) |
| Coating Diameter | 250μm |
| Mode | SM |
| Operation Time | about 15s(exclude fiber presetting) |
| Insertion Loss | ≤ 0.3dB(1310nm & 1550nm) |
| Return Loss | ≤ 55dB |
| Success Rate | >98% |
| Reusable Times | >10 times |
| Tensile Strength | >5 N |
| Tighten Strength of Coating | >10 N |
| Temperature | -40~+85°C |
| On-line Tensile Strength Test (20 N) | IL ≤ 0.3dB |
| Mechanical Durability(500 times) | IL ≤ 0.3dB |
| Drop Test(4m concrete floor, once each direction, three times total) | IL ≤ 0.3dB |
The similar products